?metallography

metallography 發音

英：[?met??lɑ?gr?fi]　　美：[?met??l?ɡr?fi]

英：　　美：

metallography 中文意思翻譯

metallography 詞性/詞形變化，metallography變形

副詞: metallographically |名詞: metallographer |形容詞: metallographic |

metallography 短語詞組

1、metallography instrument ─── 金相儀器

2、electron metallography ─── 電子金相學

metallography 相似詞語短語

1、metallotherapy ─── n.金屬療法

2、meteorography ─── n.氣象計(meteorograph的變形)

3、metallographer ─── n.金相學家

4、metallographically ─── 金相

5、crystallography ─── n.晶體學

6、metallographic ─── adj.金相學的，金相的

7、metallograph ─── n.顯微照相；金相顯微鏡；金相照片

8、allograph ─── n.代書；代理簽名；異形文字

9、metallographist ─── n.金相學家

metallography 常見例句（雙語使用場景）

1、It's your effort to ancient Jian by analysis of metallography structure through polishing klunky Jian.Expecting for last analysis. ─── 用鐵性尤存的殘劍來研磨分析金相結構，也算是古劍所發揮的最后余熱了，等看最后的成果分析。

2、Surfaces of corroded specimens have been examined by means of metallography, X-ray diffraction analysis, EPMA, SEM, etc. ─── 并用金相、X-線衍射分析、電子探針、掃描電鏡等方法對試驗后樣品的腐蝕表面進行了觀察研究。

3、powder metallography ─── 粉末金相學

4、Keywords Bainite;Dual phase steel;Color metallography;EBSD;Low carbon steel; ─── 貝氏體;復相鋼;彩色金相;電子背散射;低碳鋼;

5、According to the characteristic of glass molding, such as metallography and thermodynamic, paper analyzes the conglutination between metal and glass at high temperature. ─── 依據玻璃成型的特點,從金屬學和熱力學角度,分析了金屬與玻璃之間的粘結及金屬在高溫下氧化對玻璃模具選材的制約。

6、The tube leakage of partition overheater of No. 2 boiler in a power plant was studied by means of metallography, intergranular corrosion test and EDS. ─── 摘要針對日照電廠2(上標#)鍋爐屏式過熱器泄漏進行了金相試驗、晶間腐蝕傾向性試驗和電鏡能譜分析。

7、Keywords Semi-solid metal;Metallography;Ration analysis; ─── 半固態金屬;金相圖片;定量分析;

8、Keywords Carbon fibres;Micro structure（metallography）;Mechanical properties of materials; ─── 碳纖維;顯微組織（金相學）;材料力學性質;

9、The surface morphology and composition of Zn 5%Al RE coating hot dip plated on alloy steel wire was analyzed by means of metallography,SEM and EPMA. ─── 本文采用金相顯微鏡、掃描電鏡和能譜儀等設備分析了在Zn?5% Al?RE合金溶液中熱浸鍍中碳鋼絲表面的組織形貌和成分。

10、The reasons for disqualification of plates were investigated by means of in-situ composition analysis, metallography, scanning electron microscope and microhardness analyses. ─── 本文應用原位成分分析、金相檢驗、掃描電鏡和顯微硬度等分析方法，對此熱軋板探傷不合格的原因進行了探討。

11、Abstract The strain hardening behaviour of five TWIP steels with different Mn content was investigated by static tensile test and metallography. ─── 摘要 采用靜態拉伸、金相組織觀察方法研究了5種不同錳含量的TWIP鋼的拉伸應變硬化行為。

12、Keywords Quantitative metallography;mellable cast iron;fracture dutility;eutectic cementite;graphitizing annealing; ─── 定量金相技術;可鍛鑄鐵;斷裂韌性;共晶滲碳體;石墨化退火;

13、This category includes other facets of the subject, such as metallography, mechanical testing, and the heat treatment of metals. ─── 這一分支還包括有關的其他一些內容，如金相學，力學試驗及金屬熱處理等。

14、Analysis on metallography , macro and fracture appearance were carried out on broken link in motorbike engine. ─── 對斷裂的摩托車發動機連桿進行宏觀、金相及斷口分析。

15、In this paper, we discusses the computer analysis methods of some gestalt parameters prescribed in quantitative metallography and stereology, and the algorithms of computer image processing. ─── 本文就定量金相學和體視學中所規定的幾個重要的完形參數的計算機分析加以描述，并且對圖像處理計算機算法進行了探討。

16、The continuous cooling transformation (CCT) diagrams of deformed and undeformed austenite of weathering steel were constructed by means of a combined method of dilatometry and metallography. ─── 摘要采用膨脹法結合金相分析建立了耐候鋼變形和未變形奧氏體的連續冷卻轉變曲線（CCT曲線）。

17、The characteristic of metallography and CAI are discussed in this paper.The exploration of the CAI courseware in the dislocation of metallography and its effect of class teaching are introduced. ─── 本文討論了金屬學課程與計算機輔助教學(CAI)的特點,介紹了金屬學課程中位錯部分CAI課件開發與課堂教學效果。

18、electron metallography ─── 電子金相學

19、Application of Quantitative Metallography in Research of Melleable Cast Iron ─── 定量金相技術在可鍛鑄鐵研究中的應用

20、Study of Metallography Characteristic of TiN Coating Deposited by Different Deposition Process ─── 不同沉積工藝下TiN涂層金屬學特性的研究

21、Demonstration of the Formula dA/dV=1/R_1+1/R_2 and Its Using in Metallography ─── dA/dV=1/R_1+1/R_2的推導及其在金屬學中的應用

22、The structure and components are studied by means of X-ray spectrographic analysis, spectrometer analysis, chemical analysis, metallography analysis,X-ray diffraction diagram analysis,etc. ─── 并運用X射線光譜分析、能譜分析、化學分析、金相分析、X射線衍射相分析等手段，分析鏜桿的材料成分和組織。

23、/Our company sells many reputable instrument suppliers particularly in non-destructive testing, metallography, physics and chemistry. ─── 產品/Product：本公司經營先進無損檢測和金相理化產品。

24、Analysis on metallography, macro and fracture appearance were carried out on broken link in motorbike engine. ─── 摘要對斷裂的摩托車發動機連桿進行宏觀、金相及斷口分析。

25、color metallography ─── 彩色金相

26、Manual measuring method in quantitative metallography ─── 定量金相手工測定方法

27、2. Perform inspection by observation &analysis on metallography of metal material specimens; ─── 通過對金屬樣品的金相學觀察和分析來進行來料檢驗;

28、Theconventional quantitative analyze of metallography based on labor detection is very hardwork.Some test can not proceed, because of the great amount of work. ─── 傳統的金相定量分析人工檢測是一件很辛苦的工作,有些試驗因工作量過大而無法進行。

29、According to the practical study, this dissertation talks about the design and accomplishment of a computer-aided quantitative metallography analysis expert system based on COM technology. ─── 本文結合具體的科研課題，探討了定量金相分析技術，在此基礎上，利用COM(組件對象模型)技術開發了一個定量金相分析專家系統。

30、With the help of optical microscope （OM） and color metallography, the interface migration and its influencing factors were investigated during vacuum holding process. ─── 用光學顯微鏡和彩色金相技術，研究了真空保溫過程中界面的遷移情況及其影響因素。

31、After check the stems made by imported ferric stainless steel bars inside the 4-way reversing valve had cracks,The cracking stems was studied by Metallography,SEM and EDAX. ─── 對失效產品進行檢查、分析發現空調四通換向閥中的不銹鋼封頭有開裂,封頭采用進口鐵素體不銹鋼棒材。

32、The paper describes anodization course in metallography micostructure means,address matters needing attention,especially is pay attention to problern about handling slighrter sample. ─── 介紹了鋁合金金相顯微組織顯示方法中的陽極化處理過程,提出了操作中的注意事項,尤其是薄試樣處理過程中應特別注意的問題。

33、Research on Improvement of Piston Insert Metallography ─── 活塞鑲?cè)鹣嘟M織改進的研究

34、ion transmission metallography ─── 離子透射金相學

35、Strain of the Proeutectoid Ferrite in Hypoeutectoid Steel During Drawing Tested by Quantitative Metallography ─── 采用定量金相法分析亞共析鋼拉拔變形中先共析鐵素體應變量

36、Keywords vacuum impregnation;metallography sample;pore;resin; ─── 真空浸漬;金相樣品;孔隙;樹脂;

37、To adopt the metallography hardness method to study microstructure transformation of medial carbon steel 40 being heated and cooled. ─── 采用金相-硬度法研究了中碳鋼(40鋼)在加熱和冷卻時的組織轉變。

38、Above or equal education of college major in Chemicals, Materials, Metallography, Welding, Engineering, etc. ─── 大專以上或同等學歷，相關化學，材料，金屬學，焊接，工程等相關專業。

39、The cracked longitudinal beam of a coach was analysed by means of metallography and SEM . ─── 用金相、掃描電鏡等分析方法，對開裂的客車縱梁進行了分析。

40、The cracked longitudinal beam of a coach was analysed by means of metallography and SEM . ─── 用金相、掃描電鏡等分析方法,對開裂的客車縱梁進行了分析。

41、The metallography and EPMA show that the distributions of Si, Sn, Pb, Cr and Cu are uniform and dispersion, which is important for increasing bush performance. ─── 電子探什觀察表明; Si,Sn,Pb和Cr等元素在組織內分布均勻,有利于提高軸瓦性能。

42、The reasons for disqualification of plates were investigated by means of in-situ composition analysis,metallography,scanning electron microscope and microhardness analyses. ─── 本文應用原位成分分析、金相檢驗、掃描電鏡和顯微硬度等分析方法,對此熱軋板探傷不合格的原因進行了探討。

43、The process of Fish-eye Flake formation in welding seams of 16 Mng steel is investigated by means of SEM, EDX, IMA, SIMS reflectoscope and X-ray flaw detection as well as metallography technique. ─── 運用掃描電鏡、x射線能譜儀、離子探針、超聲波探傷儀及x射線探傷、金相技術等多種手段對16M_ng鋼焊縫中魚眼白點的形成過程作了綜合研究。

44、Fracture analysis of the gear were conducted by means of macroexamination, SEM, metallography examination and chemical composition analysis. ─── 采用宏、微觀檢驗和化學成分分析等方法，對斷裂齒輪進行了分析。

45、Publication History: Formerly known as Metallography. ─── 出版歷史：以前為著名的《金相》

46、Keywords cylinder heater;heat radiation tube;metallography analysis; ─── 圓筒爐;（熱）輻射管;金相分析;

47、Keywords Ancient bronzes;Corrosive;XRD and Raman Microscopy;Metallography; ─── 古青銅器;腐蝕產物;X射線衍射;金相分析;拉曼光譜;

48、Based on the system, the application of computer in metallography technology is discussed. ─── 以該系統為基礎,論述了計算機在金相技術中的應用。

49、radio metallography ─── X射線金相學

50、The microstructure of hot-dip aluminum coat of deformed low-carbon steel containing RE has been analyzed by metallography microscopy and XRD,and the forming mechanism has also been discussed. ─── 用金相顯微鏡及X射線衍射儀對形變含稀土低碳鋼熱浸鍍鋁的鍍層微觀組織進行了分析,并探討了其形成機制。

51、guantitative metallography ─── 定量金相

52、Metallography is the study of the microstructure of metals and alloys by means of the metallurgical microscope and the electron microscope. ─── 金相學是用金相顯微鏡和電子顯微鏡對金屬和合金的顯微結構的研究。

53、Keywords Cu-Co alloy;metallography;scanning electro-microscope;relativity;colloid sillicon; ─── 白合金;金屬相;掃描電子顯微鏡;相關性;膠體硅;

54、Metallography Analysis of Tube Cracking for Superheater Tube ─── 過熱器管爆管金相分析

55、Forging defects of mould cavity non-saturate,crack,pucker and shearing edge avulsion,etc.on the astrictive clamps and operating scissors are studied by means of appearance and metallography. ─── 采用外觀和金相方法,對止血鉗和手術剪鍛坯出現的型腔填充不滿、裂紋、重皮和切邊撕裂等缺陷進行分析。

56、Keywords plasma arc quenching;quenched grid;metallography organization;friction and wear; ─── 等離子弧淬火;淬火網格;金相組織;摩擦磨損;

57、quantitative metallography technique ─── 定量金相技術

58、Discus on some technical questions in some standards using in welding and metallography working of power installation ─── 對電建施工中焊接、金屬專業常用標準某些技術問題的討論

59、The fracture reasons of the transmission shaft were analyzed by means of chemical analysis,mechanical test,fractography and metallography examination. ─── 通過檢測化學成分、力學性能、宏觀斷口以及金相組織等方法對傳動軸斷裂原因進行了分析。

60、Keywords metal cone;metal texture;color metallography; ─── 藥芯罩;金屬織構;彩色金相;

61、Bachelor degree or above, and major in engineering or related . 2.5 years relevant experience in metallography and mechanical testing is mandatory. 3. ─── 2、5年以上金相學和機械試驗相關工作經驗。

62、There are two important features of bainite kinetics which can be shown by a variety of techniques, e.g. dilatometry, electrical resistivity, magnetic measurements and by metallography. ─── 有兩個重要特點貝氏體動力學，可表現出各種技術，例如：膨脹，電阻率，磁測量和金相。

63、A broken weld sample was analyzed by means of SEM, TEM, EDX and optic metallography. ─── 本文通過SEM、TEM、EDX及金相分析等手段,對焊口破裂件進行了分析,證明該焊口破裂屬硫化氫引起的應力腐蝕開裂。

64、The strain of the proeutectoid ferrite in hypoeutectoid steel drawing was measured and analyzed by quantitative metallography. ─── 采用定量金相法分析計算了亞共析鋼拉拔變形中先共析鐵素體應變量。

65、Because of the unsymmetrical distributing of particles in metallography no parameter can be ascertained by several data measured in a visual area. ─── 傳統的金相定量分析人工檢測是一件很辛苦的工作，有些試驗因工作量過大而無法進行。

66、By means of mordern metallography analysis technology, The microstructure and properties of carburizing-warm extrusion formed gears were studied. ─── 借助于現代冶金分析技術,對傳統切削成形和滲碳-溫?cái)D成形齒輪的組織進行了研究。

67、ray metallography ─── 射線金相學

68、Produce biological, stereology, polarizing, metallography, image analysis and electron microscopy, such as close to a hundred species of optoelectronic products. ─── 可生產生物，體視，偏光，金相，圖像分析及電子顯微鏡等近百個品種的光電產品。

69、Image Analysing Techniques for Quantitative Metallography ─── 定量金相的圖象分析技術

70、The complex modifying of RE-P on the hypereutectic Al-Si alloy was studied with SEM and quantitative metallography. ─── 采用掃描電鏡、定量金相分析等方法研究了RE-P復合變質對過共晶鋁硅合金變質效果的影響;

71、x ray metallography ─── x 射線金相學

72、Digital Reconstruction on Large-Scale Metallography Microscope ─── 大型金相顯微鏡的數字化改造

73、By means of the metallography, the Grain of the magnesium alloy is refined obviously. ─── 通過金相圖片觀察到鎂合金的晶粒明顯得到細化。

74、Using the electrodeposition and analytic technologies of SEM and EPMA, as well as metallography, the microscopic morphology and microstructure of 2D deposits of Sn and Pb 0.1Sn 0.9 are investigated. ─── 采用電化學沉積 ,配合掃描電鏡 (SEM)、電子探針微分析儀 (EPMA)、金相等分析技術 ,研究了純Sn及Pb0 .1Sn0 .9的二維沉積物的顯微形貌和微結構 .

75、The fracture of piston rod of new hydrogen compression pump is studied by metallography and electron probe in this paper. ─── 用金相顯微鏡和電子探針對新氫壓縮機活塞桿斷口進行了分析。

76、EXAMINATION RECORD FOR INTERGRANULAR CORROSION, HARDNESS, METALLOGRAPHY, FILLET WELD AND WELD CHEMICAL COMPOSITIONS. . . . . . ─── 晶間腐蝕，硬度，金相，角焊縫，焊縫化學成份檢驗記錄表

77、Imagination of Teaching Mode Innovation on Traditional Metallography Experiment Course ─── 對傳統金相實驗課教學的改革設想

78、Keywords Color metallography Heat tinting Chemical deposition Color temperature Metallographic; ─── 彩色金相;熱染;化學沉積;色溫;金相組織;

79、Keywords spheroidal graphite cast iron;metallography microstructure;computer image processing;quantitative analysis; ─── 球墨鑄鐵;金相組織;計算機圖像處理;定量分析;

80、We can change the metallography structure of hard alloy by boronizing, improve its complicated properties, reduce the brittle, increase the hardness, and at last prolong the dies service life. ─── 但硬質合金脆性大，沖擊韌性低。通過滲硼可以改變硬質合金組織，改善其綜合性能，提高硬度，降低脆性，延長了模具壽命。

81、This paper introduced chemical tint colour metallography for carbides of high speed steel W18Cr4V,to demonstrate quenching,tempering and annealing. The selenium acid agent made various carbides and alloy content sill different coloures. ─── 該文采用彩色金相化學染色技術顯示淬火態、回火態與退火態的W18Cr4V高速鋼中的碳化物，硒酸試劑使不同類型及其不同合金含量的碳化物以不同的色彩呈現。

82、Formation mechanism of surface layer structure in nickel-boronizing steel was studied using metallography,X-Ray diffraction,SEM and WDS technique. ─── 本文運用金相、掃描電鏡波譜儀以及X射線衍射技術和殘余應力測試研究分析了碳鋼的鎳-硼共滲層組織結構、形成機理及性能特點。

83、Keywords magnedc metallography cold deformation deforming martensite; ─── 磁性金相法;冷變形;形變馬氏體;

84、Based on the system, the application of computer in metallography technology is discussed. ─── 該系統為基礎，論述了計算機在金相技術中的應用。

85、The simulation of a practical automotive brake-housing SG iron casting was carried out with the improved model, and the simulation results were verified with the quantitative metallography in several samples cut from the casting. ─── 對實際汽車制動臂球鐵件進行模擬，并取樣進行定量金相實驗分析，對模擬結果進行驗證。

86、The automatic polish-grinding machine of Struers Abramin can replace man to finish the specimen of metallography through setting corres ponding program. ─── 敘述了自動磨拋機的操作及根據試樣情況設置的相應程序,給出了磨、拋試驗的工藝參數,提出了注意事項。

87、The mineral composition, microstructure and metallography of different bronze samples were analyzed with X-ray diffraction(XRD), scanning electronic microscopy (SEM), X-ray energy dispersive analysis(EDAX) and optical microscopy(OM). ─── 采用X射線衍射(XRD)、掃描電鏡(SEM)、X射線電子能譜(EDAX)和金相顯微鏡(OM)等方法,分析比較了染有“粉狀銹”與未染粉狀銹的青銅殘片的礦物組成、腐蝕層分層結構及金相組織。

88、The extracting features of metallography is the key to metallographic analysis. ─── 金相圖象特征信息提取是進行金相分析的關鍵。

89、Study of pattern recognition of CCD metallography organization ─── CCD金相組織圖形模式識別研究