?alloying

alloying 發音

英：[??l????]　　美：[??l????]

英：　　美：

alloying 中文意思翻譯

alloying 常用詞組

mechanical alloying ─── 機械合金化

alloying element ─── 合金元素

alloying 詞性/詞形變化，alloying變形

動詞過去式: alloyed |動詞現在分詞: alloying |動詞過去分詞: alloyed |動詞第三人稱單數: alloys |

alloying 反義詞

deny |disallow | prohibit | forbid

alloying 同義詞

set aside | allow for | appropriate | allocate | reserve | authorize | agree | accede | apportion | provide | acknowledge | render | consent | recognize | earmark | sanction | leave | permit | allot | tolerate |let | concede | accept | grant | admit | countenance | license | give up | take into account

alloying 短語詞組

1、alloying additions ─── 合金添加劑

2、alloying concept ─── 合金化概念

3、alloying iron ─── [材]鐵合金 ─── [材]合金鐵

4、alloying anode ─── 合金陽極

5、alloying furnace ─── 合金爐

6、fusion alloying ─── 熔融合金化

7、alloying technique ─── 合金化技術

8、alloying need ─── 合金化需求

9、alloying agent ─── [化] 合金元素

10、alloying good ─── 合金化產品

11、alloying element ─── [化] 合金元素

12、frictional alloying ─── 摩擦合金化

13、saturated alloying ─── 飽和合金化

14、alloying pdf ─── 合金化pdf

15、alloying constituent ─── [化] 合金劑

16、alloying ppt ─── 合金化ppt

17、alloying work ─── 合金化功

18、alloying effect ─── 合金化效應

19、alloying elements ─── 合金元素

alloying 相似詞語短語

1、aleying ─── 阿列英

2、allaying ─── v.減輕，消除（allay的現在分詞）

3、alaying ─── 警報器

4、allotting ─── n.取位選擇；v.分配（allot的ing形式）

5、allowing ─── v.允許（allow的現在分詞）

6、allying ─── n.同盟國；伙伴；同盟者；助手；vt.使聯盟；使聯合；vi.聯合；結盟；n.(Ally)人名；(巴基)阿利；(法)阿利；(英)艾麗(女子教名Alice的簡稱)；(尼日利)阿利

7、alleging ─── vt.宣稱，斷言；提出……作為理由

8、accoying ─── 會計

9、accloying ─── 合金化

alloying 常見例句（雙語使用場景）

1、The process flows of magnesium alloy surface alloying and electrophoretic coating were introduced. ─── 介紹了鎂合金表面合金化及電泳涂裝工藝流程。

2、The alloying annealing process of zinc layer is also described. ─── 并對鋅層合金化退火工藝進行了闡述。

3、Problems existing in converter smelting and deoxidation alloying courses are found,operation technique is optimized and corresponding improved measures are advanced. ─── 找出了轉爐冶煉和脫氧合金化環節中存在的問題,優化了操作工藝,提出了相應的改進措施。

4、The rapid surface alloying of AISI 316L stainless steel by high current pulsed electron beam(HCPEB) was investigated. ─── 利用強流脈沖電子束對不銹鋼表面進行了快速鈦合金化。

5、In this paper, numericalsimulation for temperature field of Mo2/N films generated on molybdenum surfaceusing laser gas alloying(LGA) method is performed by finite-difference method. ─── 本文用有限差分法對金屬鉬表面脈沖激光生成氮化鉬薄膜過程的溫度場進行了三維數值模擬計算。

6、It was pointed out that the high quality zinc powders could be produced by controlling effectively the processes of alloying,atomizing and sieving,as well as reducing the pollution in every process. ─── 指出,通過加強對合金化、霧化和篩分過程的有限控制,減少各流程的污染,能生產出高質量的無汞鋅粉。

7、Direct reducing and alloying of scheelite and molybdenum oxide is considered by thermodynamic and kinetic calculation and analysis in this paper. ─── 對白鎢礦和氧化鉬直接還原合金化進行了熱力學和動力學計算和分析。

8、A number of alloying elements can be added to steel in order to make it suitable for specialized application . ─── 為使鋼更適于某些特定的用途，可以在鋼中加入多種合金元素。

9、The computation of alloying in RH process control is very important.Its goal is to acquire the aim product properties,and meanwhile to minimize the cost of addition alloy. ─── RH過程控制中合金化的計算是一個很重要的問題,在保證獲取目標產品性能的同時,要盡量使添加合金的費用最低。

10、Some techniques to improve the mechanical properties of V process castings, such as surface alloying, inoculant addition to the coating are presented. ─── 也介紹了改善V法鑄件機械性能的方法，如表面合金化，涂料中加入孕育劑等。

11、A alloy with excellent mechanical properties and wear resistance has been developed by optimizing alloying elements on ZA27 alloy basis. ─── 在ZA27合金的基礎上，通過合金元素的調整和優化，研制了一種具有優良力學性能和耐磨性能的鋅基耐磨合金。

12、Metal Traders or producers of primary non-ferrous metal products, encompassing all processes from smelting to alloying, rolling and drawing. ─── 有色金屬生產商和交易商,包括冶煉,融合,滾軋及拉延處理。

13、the alloying is even and easy to be broken, which reduces the preparation cost of titanium alloy. ─── 合金化均勻易破碎，降低了鈦合金制備成本。

14、The surface alloying under casting penetration is synthetically discussed. ─── 對鑄滲條件下的鑄件表面合金化進行了綜合述評；

15、Compared blowing nitriding to ladle with alloying nitriding, the blowing nitrogen to ladle is thought to be a economic and advisable method. ─── 對鋼包內吹氣增氮和合金化增氮進行比較,認為鋼包吹氮是一種比較經濟、可取的方式。

16、Alloying a metal not only increases its hardness but also its electrical resistance. ─── 把金屬熔成合金不僅提高其硬度，而且也增加金屬的電阻。

17、Abstract: Langmuir probe technique was used for the plasma diagnostics of double-glow plasma surface alloying process.Effects of the process parameters on plasma parameters were discussed. ─── 摘 要: 用朗繆爾單探針技術對離子滲金屬中的等離子體參數進行了診斷, 討論工藝參數對等離子體參數的影響。

18、On this basis, summary remarks are presented on the advantageous aspects and prospects of mechanical alloying as a . . . ─── 指出了機械合金化技術在納米晶材料制備方面的優勢及應用前景。

19、The methods to improve the intensity of cold-rolled sheets is to add some useful alloying elements during steel-making and improve the cooling rate annealing treatment. ─── 提高冷軋薄板機械強度的方法主要是在煉鋼時添加有益的合金元素及在熱處理時提高退火后的冷卻速率。

20、An engineer trained in the extraction and refining and alloying and fabrication of metals. ─── 在提

21、Melting loss of alloying element ─── 元素?zé)龘p

22、Effects of various alloying elements (Li, Si, Ca, Sn, Bi, Sb, Ag, Th, Re, Nd and Zr) on beat-resistant properties of magnesium alloys, as well as the functioning mechanisms are summarized. ─── 介紹了鋰、矽、鈣、錫、鉍、銻、銀、釷、稀土以及其中的釹、鋯元素對鎂合金性能尤其是耐熱性能的作用及影響機理，總結了提高鎂合金高溫性能的途徑。

23、The previous methods to improv the servce life of the plug were described, and it was pointed out to carry on the research on RE-aluminium alloying to increase the plug life. ─── 對過去提高頂頭壽命的工作作了簡介，提出開展稀土鋁合金化提高頂頭使用壽命的研究。

24、Partial substi-tution of alloying elements has found to occur in all the constituent phases caus-ing small deviations from the stoichiometric compositions reported for the ternarycompounds. ─── 所有夾雜相的合金元素均部分地被其它元素所取代,使粗大夾雜相的成分稍偏離于理想的三元化合物。

25、Results show that high strength and thin wall gray iron with high carbon equivalent can be obtained by Cr Mo alloying and RCC inoculant. ─── 其結果顯示，在高碳當量條件下，采用低合金化和稀土復合孕育劑孕育處理，可以穩定地獲得生產缸體、缸蓋用的高強度薄壁灰鑄鐵。

26、This artjcle deals with the effect of alloying elements on the macrostructure,depth,phase compo sition and microhardness of the complex boronisation lamination. ─── 分析并系統研究了合金元素對復合硼化層宏觀組織、深度、相成份及顯微硬度的影響。

27、DT300 Low Alloying Ultra-high Strength Steel ─── DT300低合金超高強度鋼

28、Controlled concentrations of specific donors or acceptors may be intentionally added into materials to form extrinsic semiconductor using various techniques. Such an alloying process in semiconducting materials is termed doping. ─── 控制特定施主和受主原子的濃度，進而運用各種方法能動地填加，這種在半導體材料中加入合金成分的過程稱為摻雜。

29、In this paper the mathematical pattern and its application of the optimum calcula-tion and decision analysis for Alloying of electric furnace steelmaking are presented with ex-amples. ─── 本文介紹了利用微機進行電爐煉鋼合金化優化計算及其決策分析的數學模型和應用實例。

30、The surface alloying under casting penetration is synthetically discussed. ─── 對鑄滲條件下的鑄件表面合金化進行了綜合述評;

31、On the basis of corrosion test data and their statistical analysis, the relationship between alloying elements and corrosion rate has been derived. ─── 在典型的制鹽生產工藝使用的鹵水介質中，進行了不同成分的低合金鋼的腐蝕試驗。

32、By means of spray weld alloy powder alloying of casting surfaces has come true in spraying and coating-cast technology. ─── 本文應用噴焊合金粉末，采用噴熔、涂鑄、熔鑄工藝方法使鑄鐵件表面合金化，硬度、耐磨性提高。

33、It has been proved that rare earth La also pe-rmeates into the layer and acts as an alloying element during the process of ni-tro-carbo-boronizing witn ion microanalysis. ─── 使材料的耐磨性、耐蝕性獲得了明顯提高，離子探針檢測證實，稀土元素鑭也滲入了鋼的表面，起到了微合金化的作用。

34、P. D. Deeley, K. J. A. Kunding and H. R. Spendelow, 1981, Ferroalloys &Alloying Additives Handbook, Shieldalloy Corporation &Metallurgy Alloy Corporation. ─── 日本熱處理技術協會，1984，特殊鋼的熱處理，復漢出版社。

35、On the basis of systematical study,the comprehensive effects of alloying elements in cryogenic austenitic steels were analyzed. ─── 在系統研究結果的基礎上,分析總結了低溫奧氏體鋼中合金元素的綜合作用。

36、Microstructure and Properties of the Carburize-quenched Surface after Laser Alloying[J]. ─── 引用該論文 闞義德,劉文今,鐘敏霖,馬明星,李敏,張偉明,張紅軍.

37、A mathematical model is developed to analyze the movement of Fe Mn alloy in a bottom stirred ladle, the melting process and trajectories of alloying addition movement are calculated. ─── 建立了底吹鋼包內加入合金后的運動過程數學模型，計算了鐵錳合金顆粒在吹氬鋼包內的熔化過程和運動軌跡。

38、The theory and process of mechanical alloying were described and the adopted apparatuses were introduced. ─── 描述了機械合金化的過程和機理,并對機械合金化采用的設備進行了介紹。

39、Brittleness is often a result of alloying. ─── 脆性往往是合金化的一種結果。

40、In this paper three methods of anti-corrosion, including ion injection, coating on uranium surface and alloying are mainly discussed and described. ─── 從離子注入、離子鍍以及表面合金化處理3方面綜述了鈾及鉑合金的防腐涂層方法的研究。

41、Keywords spring steel;alloying;microalloy element; ─── 彈簧鋼;合金化;微量合金元素;

42、The alloying elements of the cladding weld, indicated in the table, shall be checked using a proven quantitative analytical technique. ─── 列于下表中的復層焊縫合金元素應采用已驗證過的定量分析技術檢驗。

43、On the basis of deep research on the role of the alloying elements and alloy combinatio... ─── 分析和研究了彈簧鋼合金化的最新發展趨勢。

44、The results show that the alloying surface layer is comprised of three parts which are hypoeutectic layer, eutectoid layer and matrix. ─── 實驗證明，所形成的合金化層由三部分組成：亞共晶層、共析層和基體；

45、The prospect of small alloying additions was also investigated in this paper. ─── 并對飾品金合金微量添加元素的發展進行了展望。

46、The methods for nanostructured materials (NSM) fabrication are introduced including gas condensation, mechanical alloying and spray conversion. ─── 介紹了NSM的主要制作方法，包括氣相凝固法、機械合金化法和噴霧轉化法等。

47、The compositions and microstructure of surface alloying layer wereinvestigated by the advanced means of XRD,SEM,BES,EDS. ─── 其中滲層的成分分布、顯微特征、結構形貌采用了先進的XRD、SEM、BSE，EDS等手段進行了檢測分析。

48、The factors to influence the quality of surface alloying and existing problems are analyzed, and the advantages of surface alloying of EPC castings are discussed. ─── 分析了影響合金優質量的各種因素,以及存在的基本問題,并討論了用消失模法實現表面合金化的優點。

49、The effect of graphite morphology and alloying elements on thermal fatigue resistance of cast iron was studied. ─── 對石墨形態、合金元素等對鑄鐵抗熱疲勞性能的影響進行了研究。

50、Alloy steels are formed by the addition of one or more of the following elements: nickel, tungsten, silicon and small amounts of other alloying elements. ─── 加過下列一種或幾種元素可制成各種合金鋼:鎳、鎢、硅和少量別的合金元素。

51、Thus, the role of alloying element depends mainly on its impact on the state diagram. ─── 因此，合金元素的作用主要取決于其對狀態圖的影響。

52、Nitrogen alloying process was set up by theories of nitrogen dissolved and degassed in stainless steel refined in AOD. ─── 介紹了AOD爐運用氮?dú)庠诓讳P鋼中溶解與脫除理論所開發的氮合金化工藝。

53、double glow plasma surface alloying ─── 雙層輝光離子滲金屬

54、The latest researches concerning microstructure and phases of AZ91D magnesium alloy as well as the effects of heat treatment and alloying elements on them were comprehensively analyzed. ─── 摘要分析了國內外有關AZ91D鎂合金鑄態組織與合金相、熱處理以及合金元素對鑄態組織及合金相的影響等方面的最新研究；

55、THE MICROSCOPIC MECHANISM OF ALLOYING ELEMENTS AFFECTING THE DUCTILITY OR BRITTLENESS OF FeAl INTERMETALLICS?? ─── 合金元素韌化或脆化FeAl金屬間化合物的微觀機制

56、Two processes were introduced，that is, the decarbonizing and then surface alloying，and the surface alloying directly. ─── 介紹了兩種處理工藝，一種是脫碳后滲金屬，另一種是直接滲金屬。

57、The formation mechanism of polymer solid alloy and the theoretical model of alloying process were discussed based on mechanical alloying and mechanochemical principles. ─── 以機械合金和力化學原理為基礎，討論了高分子固體合金的形成機理和合金化過程的理論模型。

58、It is shown that the degree of superheat of molten steel and the deoxidation alloying are main factors for the formation of skin blowhole. ─── 明確了鋼液的過熱度及脫氧合金化是鑄坯產生皮下氣泡的主要影響因素;

59、Meanwhile, alloying agents can form carbides, so the hardness of bead welding layer is increased. ─── 同時又由于合金元素能形成碳化物,因此提高了堆焊層的硬度。

60、Process formula and operation steps of magnesium alloy surface alloying were discussed. ─── 討論了鎂合金表面合金化的工藝配方及其操作步驟。

61、Choice of metallization scheme, surface pretreatment and alloying process are discussed. ─── 本文討論了金屬化方案的選擇、表面預處理和合金化處理等幾個問題,回顧了近年來p型GaN歐姆接觸的研究進展。

62、In structure, matrixes and borides were included in as-cast condition and the matrixes were changed with different alloying elements and quantity. ─── 在鑄態條件下，其組織由基體和硼化物組成。

63、After tempering treatment at different conditions,the tempering stability of Fe-base hardfacing layer containing multiple alloying element was investigated. ─── 對多元合金鐵基堆焊層的焊態試樣進行不同條件下的回火后處理,研究了該堆焊層的回火穩定性。

64、Pressing to attitude is divided into four major types:molten lava, athrogenic rock, moraine moltenlava and alloying athrogenic rock. ─── 按產狀又可分為熔巖、火山碎屑巖、火山碎屑熔巖、熔結火山碎屑巖四大類。

65、Copper, one of the main alloying elements, has great effect on the microstructure and properties. ─── 提高銅元素含量可能形成多相強化的效果，從而提高合金的強度。

66、The computation of alloying in RH process control is very important.Its goal is to acquire the aim product properties, and meanwhile to minimize the cost of addition alloy. ─── 摘要RH過程控制中合金化的計算是一個很重要的問題，在保證獲取目標產品性能的同時，要盡量使添加合金的費用最低。

67、The interfacial diffusion of alloying element is an important factor to microstructure, apparent hardness and interfacial bond strength. ─── 元素在界面兩側的擴散是影響材料顯微組織、表觀硬度及界面結合強度的關鍵。

68、The development of mechanical alloying was summarized. The basic principle, the theoretic research and the influential factors of mechanical alloying were introduced. ─── 摘要綜述了機械合金化的發展情況。著重介紹了機械合金化的基本原理、機械合金化過程中的理論研究，機械合金化過程中的影響因素。

69、Many factors have been confirmed to influence the sulfidation behavior of the iron aluminides intermetallics such as alloying component, corrosion atmosphere, temperature and pretreatment conditions. ─── 影響鐵鋁金屬間化合物高溫硫化腐蝕的因素主要有:合金成分、腐蝕氣氛、溫度、預處理工藝等。

70、The microstructure and phase structure of precipitate in double glow phasma W-Mo alloying layer are studied in this paper. the causes for precipitiation are analyszed in theory and by experiment. ─── 對雙層輝光離子滲鎢鉬的合金層中析出物進行了金相組織分析，從理論及試驗上指出其析出的原因。

71、double glow plasma surface alloying technique ─── 雙層輝光離子滲金屬技術

72、The multiple mechanism of excimer laser gas alloying is confirmed to be effective to improve the corrosion resistance of Al/SiC composite. ─── 準分子激光氣體合金化對金屬基復合材料的復合抗蝕機理使材料的抗腐蝕性能得到了顯著提高。

73、The effects of alloying elements,modification treatment and thermoplast ic deformation on the structure and properties of hypoeutectic white cast iron w as studied and discussed. ─── 探討了合金元素、變質處理和熱塑性變形對亞共晶白口鑄鐵組織和性能的影響，確定了合適的成分范圍。

74、The paper mainly summarized the small alloying additions added to the gold alloy for jewellery as the strengthener,deoxidizer,grain refiner and castability improver. ─── 從提高強度、防止氧化、提高鑄造性能以及細化晶粒幾個方面綜述了飾品金合金中微量添加元素的一些研究現狀。

75、The effect of alloying elements on expansion coefficient of greg iron was investigated. ─── 利用正交試驗方法,研究了合金元素對灰鑄鐵膨脹系數的影響;

76、One way to enhance the working life of piercer point by means of Re-Al alloying was offered and its feasibility was proved in this paper. ─── 提出了利用稀土鋁合金化提高頂頭使用壽命的措施,并對該措施的可行性進行了論證。

77、This paper introduce how to develop hot rolled strip used for J55 ERW casing for petroleum by using the technology of Nb micro alloying in BaoTou CSP plant. ─── 介紹了包鋼CSP廠采用Nb微合金化技術開發直縫焊石油套管用熱軋鋼帶J55的過程。

78、Numbers indicate respective nominal compositions of main alloying elements. ─── 數字表示主要合金元素的各自標稱組成。

79、The fatigue life is insensitive to the titanium alloying method.If alloys have the same titanium content, two kinds of alloys have similar low cycle fatigue life. ─── 合金的疲勞壽命對加鈦方式不敏感， 在相同鈦含量下， 兩種加鈦方式的合金具有相近的低周疲勞壽命。

80、The truncated electrode degradation mechanism is basically caused by wear and a little alloying, and by a mass of deformation on electrode tip. ─── 截錐形電極的失效除了電極頭部的磨損和少量的合金化外，還有電極頭部大量的塑性變形。

81、The friction property of high, middle and low P alloying cast iron was compared with that of ordinary cast iron. ─── 比較研究了高、中磷合金鑄鐵與普通灰鑄鐵的摩擦性能。

82、Laser quenching,laser cladding and laser surface alloying,as well as microstructure and properties were presented.The properties and research progress of intelligent coating were reviewed. ─── 介紹了激光淬火,激光熔凝,激光表面合金化等材料表面改性技術及其組織和性能;綜述了智能涂層的特點及研究進展。

83、Study of V-EPC Cast on Surface Alloying Process ─── V-EPC法鑄滲工藝的實驗研究

84、The casting coatings: expand and strengthen the transferred coating, surface alloying paint application fields and its mechanism. ─── 鑄造涂料：擴大和加強轉移涂料、表面合金化涂料的應用領域和機理研究。

85、The thermodynamic analysis shows that the infiItration of molten iron into the alloy powder paste is the key to form a surface alloying layer in the process of surface alloying during casting. ─── 對鑄造表面合金化過程進行了熱力學分析，認為鐵水向膏劑內浸滲是形成良好合金層的關鍵環節。

86、It can be improved by inoculation, modification, alloying, high temperature prespheroidization and eletron slag remelting(ESR). ─── 改善的途徑有孕育處理、變質及合金化、共晶碳化物的高溫頂球化及電渣重熔等。

87、The microstrueture of compagted graphite cast iron glass mould with RE alloying was observed. The heat-proof behavior was tested and industrial scale experiment was made. ─── 對稀土微合金化蠕鐵玻璃模具的顯微組織作了觀察,對其耐熱性能進行了測定,并進行了工業性試驗。

88、NITON XL3-800 Series analyzers provide alloying chemistry for up to 30 of the most common elements in tens of thousands of alloy grades, with additional elements available on request. ─── NITON XL3-800系列金屬分析儀可對上萬種合金分析儀 中最常見的30種化學元素做出分析，如有特殊要求，也可提供對其它元素的分析測試。