?midships

midships 發音

[['midʃips]]

英：　　美：

midships 中文意思翻譯

midships 詞性/詞形變化，midships變形

原型:midship

midships 短語詞組

1、amidships or midships ─── 船中

midships 相似詞語短語

1、ludships ─── 路德希普

2、midship ─── adj.船體中部的；n.船體中部

3、sibships ─── n.兄弟姊妹；血親關系

4、windships ─── 帆船

5、inships ─── inships

6、amidships ─── adv.在船腹；在船中部

7、airships ─── n.飛艇

8、amidship ─── adj.在船中部的；adv.在（接近）（船）中部

9、endships ─── 末梢

midships 常見例句（雙語使用場景）

1、Optimization of Midship Section Structure of Large Crude Oil Carrier Based on Genetic Algorithm ─── 大型油船中剖面結構優化設計的遺傳算法

2、midship optimum design ─── 中剖面優化設計

3、Optimum design of midship sectional transverse members based on genetic algorithm ─── 基于遺傳算法的油輪中剖面橫構件優化設計

4、The thickness of side plates shall be approved by Classification Society.The thickness of steel plates from midship to both ends shall be applied as per rules of classification society. ─── 舷側外板的厚度應經船級社認可，從船中部至船兩端的外板厚度應滿足規范要求。

5、On the design of midship section of 300 000 DWT VLCC ─── 300000dwt 超大型油船的中剖面設計

6、The weight of large crude oil carrier midship section structure is minimized with genetic algorithm based on DNV rules. ─── 本文采用遺傳算法對大型油船中剖面結構進行了基于DNV規范的優化。

7、Keywords ship;VLCC;CSR;longitudinal strength;midship section design; ─── 船舶;超大型油船;結構共同規范;總縱強度;中剖面設計;

8、Good afternoon, Mr. Pilot. I am the captain. Now the Engine is dead slow ahead, midships. ─── 下午好，引航員先生。我是船長?，F(xiàn)在船舶微速前進，正舵。

9、Side curtain, draw bar, midship axles! ─── 中國基本上無蹤跡的東西們...

10、{0>Article 70 The shipping administration authority or the local government may, as it deems necessary to limit the draft of small ships, assign the maximum draft and mark it on both midship sides. ─── 第70條 航政主管機關或直轄市、縣(市)政府，認為小船有限制吃水之必要者，得勘劃最高吃水尺度，標明于船身中部?jī)膳浴?/p>

11、midship shaft bearing cover ─── 中間軸軸承蓋

12、During the process of the midship section design, drawing and calculatingare carried through crossly; ─── 而且，隨著結構設計階段的發展，局部性結構設計不斷深化，舯部結構的計算和圖紙的繪制均不免要反復加以修改，直到彼此能相互準確呼應。

13、midship bulkhead ─── 中部艙壁

14、midship frame ─── 中部肋骨

15、large amounts of piping are to be seen on the deck running from the pump rooms to the discharge manifolds positioned an midships,port and starboard. ─── 很多管道系統將被看見在跑從泵房的甲板到放電多頭管安置了船中央地，口岸和右舷。

16、hull midship section modulus ─── 船體中剖面模數

17、The optimization of the midship section structure of a large crude oil carrier with genetic algorithm based on DNV rules is introduced. ─── 摘要采用遺傳算法對大型油船中剖面結構進行了基于DNV規范的優化。

18、Article 70 The shipping administration authority or the local government may, as it deems necessary to limit the draft of small ships, assign the maximum draft and mark it on both midship sides. ─── 第70條 航政主管機關或直轄市、縣(市)政府，認為小船有限制吃水之必要者，得勘劃最高吃水尺度，標明于船身中部?jī)膳浴?/p>

19、Keywords VLCC Design of midship section; ─── 關鍵詞VLCC;中剖面設計;

20、area of midship section ─── [機] 中央橫斷面積

21、Distance from midship to center of floatation ─── 浮心距船中距離漂心距船中距離

22、The drain driving section was located at midship and multiple driving rigs were installed on the barges for plastic drain installation. ─── 打設船采用在船鐘設打設區的結構，且采用多臺成組的打設方式；

23、Moment of inertia of midship section ─── 舯剖面慣性矩

24、midship section ─── [船]船(體)中(段)斷面圖

25、midship coeficient ─── 船中系數

26、midship mounting ─── 中間支承

27、midship engine ─── 中置式發動機

28、Wherethe long bridge deck within 0.5 L amidships is regarded as strengthdeck, the midship section modulus and minimum thickness of the deckplating comply with the requirements of 2.2.1 and 2.4.2.l of this isChapter. ─── 例1:在船中部0.5L區域內的長橋樓甲板作為強力甲板時，其船中剖面模數及最小厚度應滿足本章2.2.1及2.4.2.1的要求。

29、midship section design ─── 中剖面設計

30、The paper described a knowledge-based CAD system for the generation of containership midship sections, its principles and the process of its development. ─── 文中介紹了集裝箱船中剖面生成基于知識的計算機輔助設計系統，及其基本原理。

31、midship frame space ─── 船中部肋骨間距

32、Keywords intermediate bearing;midship shaft;finite element analysis; ─── 軸承平衡支撐;中間接軸;有限元分析;

33、Midships Rudder to be held in the fore and aft position. ─── 1正舵舵保持在船首尾線位置上。

34、Nishihara S.Ultimate longitudinal strength of midship cross section.Naval Arch.& Ocean Engng,1984(22):200-214 ─── 馬志敏.船體梁極限強度分析.武漢:武漢理工大學交通學院,2003

35、midship deep tank aft. ─── 船中后深艙

36、It is also better to stay in midship than at the bow or stern because that is where the sea swell is less pronounced. ─── 還有，你最好待在船中間的位置，避免待在船頭或船尾，因?yàn)橹虚g的位置海浪不那么強烈。

37、The weight of midship section structure for large crude oil carrier is minimized based on DNV rules. ─── 摘要基于DNV規范對大型油船中剖面結構進行了優化設計。

38、Midship cannoneers,sight the masts. ─── |中央炮手 瞄準敵人的主桅!

39、double barrel midship pump ─── 雙筒船中部抽水泵

40、Midship section design is a vital step among ship's design. ─── 船舯所受彎矩最大，是全船結構主要矛盾之所在，組成了船體結構的全局性構想，因而是船舶設計的重中之重。

41、Distance from Midship to Center of Buoyancy ─── 浮標中心距船體中央距離

42、Keywords Oil tanker;Common Structural Rules;Load Calculating;Midship Section;Buckling Strength;Finite Element; ─── 油船;共同結構規范;載荷計算;中橫剖面;屈曲強度;有限元;

43、midship shaft bearing ─── 中間軸軸承

44、Advances in the optimum design of the oil tanker in China are reviewed, including the longitudinal component of the midship section, the transverse component and the transverse bulkhead. ─── 從中剖面縱向構件優化設計、橫向構件優化設計及橫艙壁結構優化設計三方面評述了國內油船結構優化設計的現狀；

45、Immersed Midship Section ─── 浸水船中剖面

46、Midships area coeff. ─── ：船舯剖面系數。

47、After optimization of the midship section structure, the paper researches on optimum design of large crude oil tanker transverse bulkhead structure based on DNV rules. ─── 在中剖面結構優化設計的基礎上,本文研究了基于DNV規范的大型油船橫艙壁結構優化設計。

48、The GT-R is loosely based on Nissan's flexible FM platform but it contains so many unique elements that engineers have a separate name for the platform - PM premium midship. ─── GT的-R是日產的基礎上松散的靈活調頻平臺，但它含有許多獨特的內容，工程師有一個單獨的名稱該平臺-下午溢價船中。

49、curve of area of midship section ─── 船體中段剖面面積曲線

50、So drawing andcalculating of the midship structure must be modificated again and again, untilthe perfect consistence between the data and graph is realized. ─── 特別是在手工設計為主的時期，浪費了大量的人力物力。

51、He has the responsibility and authority for preparation of hull initial drawings such as construction profile, midship section, shell expansion and etc. ─── 他有責任和權利準備船體初始圖紙，像建筑輪廓，船體中央部分，船殼擴展等。

52、The ship to be arranged as a single decker. Machinery to be arranged midship and all accommodation forward. The ship to be dimensioned for a maximum draft (approx. 6,20 m). ─── 此船按單甲板布置,主機布置在船中部,所有的膳宿布置在船前面。在最大吃水條件下標注尺寸(大約6.2m)。

53、midship section coefficient ─── 舯剖面系數

54、In the center, in other words “midship” of these entrance areas, is the exhibition hall, which joins all the theatre foyers together. ─── 在中央，換句話說，在這兩個入口區域的“船中央”是展覽廳，它把劇院的所有休息室都連接起來。

55、midship tank ─── 中間水艙

56、midship the helm! ─── 正舵!正舵

57、Midship Section Area ─── 舯剖面面積

58、Casting Die Design of Midship Mounting on Heavy Duty Starters ─── 重型減速起動機中間支架壓鑄件模具設計

59、midship pump ─── 中置泵